 |
| Fine Product Recommendation: Four-column HJ-10 High-speed Molding Encaustic Tile Production Line |
 |
Component Parts of HJ—10 High-speed Fine Molding Tile Equipment |
| Elevator |
1 set |
| Mixer |
1 set |
| Quantifying Machine |
1 set |
Main body of forming machine |
1 set |
Main tile mould1 pair |
1 pair1 |
Main tile bracket |
2000 Pcs |
Equipment to be procured by customers |
| Standard workshop |
|
Storage yard |
|
Forklift truck |
|
Air compressor |
|
Tile supports |
|
Maintenance tools |
|
Steam curing chamber |
|
| >>>> Main Specifications <<<< |
| 1.Control system: Mitsubishi PLC system from Japan |
| 2.Hydraulic system: forming output pressure: 150 Ton
|
| 3.Sealing parts: imported |
| 4.Master cylinder diameter: 320mm |
| 5.Master cylinder stroke: 250mm |
| 6.Electronic valve: made in Shanghai |
| 7.Mortar quantifying system: 600kg |
| 8.Feeding stroke: 300mm |
| 9.Forming cycle: 8—10 seconds |
| 10.Output per shift: 2800-3000 Pcs／8h |
| 11.Body weight: 5.8T |
| 12：Total power: 15KW |
|
|
| |
| HJ—10 high-speed fine molding tile forming machine is the new generation encaustic tile machine, through which, the plastic concrete is compressed under 150 ton pressure with high-quality mould, which results in high density and strength of finished products. The advanced structure ensures good performance in rain and wind resistance. The finished products will be smooth in surface, precise in dimensions and are undoubtedly fine among concrete products. |
| HJ—10 high-speed fine molding tile forming machine can make different types of fine tiles, the current types include Spain type and flat-plate type. Different types generate different styles. The tile surface can be supplied in polished type, knurling type and stone-grain type, etc. All these make the roofing design more individual, humanized and live as if a life. |
| HJ—10 high-speed fine molding tile forming machine can also make varieties of fine encaustic tiles which improves the utility rate of equipment investment. The material for production can be from steel slag, furnace slag, fly ash as well as domestic wastes. |
The main body of molding forming machine is provided with Mitsubishi PLC computerized control device from Japan and the hydraulic system with domestic or imported original parts to guarantee continuous normal operation and remain advanced in entire quality among similar products from home and abroad. |
| Favorable price:Ask the board to mix by oneself |
| u
Main Parameters of HJ-10 High-speed Fine Molding Tile Equipment u |
Output per shift |
Forming speed |
Operation mode |
Installation capacity |
Working voltage |
2800-3000片 |
6-8 Pcs/minute |
automatic |
7KW |
380V |
Standard workshop |
Curing Chamber |
Labor requirement |
Encaustic tile size |
Forming cycle |
| 15×15㎡ |
14×5㎡ |
5 persons |
424mm×337mm×l3mm |
8—10 seconds |
|
